The low-pressure flat membrane experimental equipment (TYLG-18) produced by Shandong Bona Biotechnology Group Co., Ltd. can be replaced with microfiltration membranes, ultrafiltration membranes, nanofiltration membranes, reverse osmosis membranes, and seawater/brackish water desalination membranes, suitable for various membrane testing and research, as well as filtration of small amounts of materials. Widely used in fields such as biology, pharmaceuticals, food, chemicals, environmental protection, etc., for process experiments such as concentration, separation, purification, clarification, and sterilization of feed liquids. Circular or square membrane cells of different sizes can be customized according to experimental requirements.

1. The equipment is equipped with a data recording system that can simultaneously record the design temperature, pressure, raw water conductivity, permeate liquid conductivity, and permeate liquid weight. You can use a USB flash drive for data copying and connect to a computer for data detection. The data can be output to a table for analysis and summary.

2. The pump adopts a pressure sensing system, which can set the highest pressure and achieve automatic overpressure protection, ensuring safe and reliable use.

3. The pump adopts a temperature sensing system, which can set the maximum pressure and achieve automatic protection against overheating, ensuring safe and reliable use.

4. The equipment is equipped with a conductivity detection system, which can detect the conductivity of the original solution and the permeate at any time.

5. The equipment adopts an automatic collection system for the permeate liquid. After the conductivity detection of the permeate liquid is completed, the liquid enters the weighing system through the pipeline. The collection and discharge time of the permeate can be set according to requirements, or the discharge can be set according to the weight of the permeate. Weighing data collection and can be changed according to the recording system.

6. The membrane tank is designed with a special flow channel, which can ensure stable and consistent pressure and flow rate at each point of the membrane.

7. Design according to fluid dynamics to ensure tangential flow and turbulence in the membrane pool, and ensure the reliability and stability of test data.

8. Microfiltration membranes, ultrafiltration membranes, and nanofiltration membranes can be installed. Suitable for membrane testing research and filtration experiments with small amounts of material.

9. Using a jacket material tank, it can be connected to a high and low temperature circulation device for temperature control.

10. Equipped with automatic overpressure protection function, overpressure automatically shuts down, ensuring safety during use;

11. Equipped with a temperature control module, it automatically shuts down when overtemperature occurs, ensuring the stability of materials during the experimental process;

12. The equipment power supply adopts dual switch control, and the low-voltage power supply operates to fully ensure the safety of equipment and personnel.

13. All stainless steel welding adopts automatic argon filling protection, single sided welding, double sided forming, and the internal and external surface quality of the pipeline is excellent. There are no welding points in the pipeline that come into contact with the material, ensuring the pressure resistance and corrosion resistance of the equipment. The equipment is easy to operate, clean and hygienic, safe and reliable.

1 feeding pump, 1 discharge pump, 3 SUS316L membrane tanks, 4 sets of pressure sensors, 1 set of temperature sensors, 1 set of jacket material tanks, 4 pressure regulating valves, 3 sets of weighing scales, 1 set of raw water conductivity, 3 sets of through conductivity, several pipelines and their connections, 1 set of rack, 1 set of overpressure control system, 1 set of overtemperature control system, and 1 set of data recording system.