The electrified high-pressure flat membrane experimental equipment (TYLG-19E) produced by Shandong Bona Biotechnology Group Co., Ltd. can be replaced with microfiltration membranes, ultrafiltration membranes, nanofiltration membranes, reverse osmosis membranes, and seawater/brackish water desalination membranes, suitable for various membrane testing and research, as well as filtration of small amounts of materials. Widely used in fields such as biology, pharmaceuticals, food, chemicals, environmental protection, etc., for process experiments such as concentration, separation, purification, clarification, and sterilization of feed liquids. Circular or square membrane tanks of different sizes can be customized according to experimental requirements.

1. The internal and external surface quality of the pipeline is excellent, and the entire set of equipment materials come into contact with the pipeline without any welding points, ensuring the equipment's pressure resistance and corrosion resistance performance. Easy to operate, clean and hygienic, safe and reliable.

2. The equipment has dual pump control, and the microfiltration and ultrafiltration membranes can only start the auxiliary pump, effectively ensuring different control of flow and pressure during high and low pressure testing.

3. The pump adopts a pressure sensing system and a frequency conversion control system, which can adjust the pressure and flow rate through frequency conversion. It can set the ideal pressure and achieve automatic overpressure protection, making the use process very safe.

4. The membrane tank is designed as a circular shape with a special flow channel design, which can ensure stable and consistent pressure and flow rate at each point of the membrane.

5. Design according to fluid dynamics to ensure tangential flow and turbulence in the membrane pool, and ensure the reliability and stability of test data.

6. Microfiltration membranes, ultrafiltration membranes, nanofiltration membranes, and reverse osmosis membranes can be installed. Suitable for membrane testing research and filtration experiments with small amounts of material.

7. Using a 10L jacketed material tank, it can be connected to a high and low temperature circulation device for temperature control.

8. The equipment is equipped with a digital pressure sensor with an accuracy of 0.4% FS, which can accurately record testing high and low pressure data, ensuring data accuracy and overcoming the defect of low accuracy of mechanical pressure gauges.

9. The membrane cell adopts a parallel structure of 6 membrane cells, with 3 charged membrane cells installed first, and the other three membrane cells reserved for experimentation with any one or several of them. Different diaphragms can be installed simultaneously for simultaneous testing to ensure consistency in feed flow and state.

10. Equipped with an overtemperature automatic protection system, with automatic alarm and shutdown for overtemperature.

Dual pump control (auxiliary pump: 1 electromagnetic feed pump, main pump: 1 high-pressure plunger pump), 3 acrylic membrane tanks, 7 sets of pressure sensors, 1 set of material tank, 7 pressure regulating valves, several pipelines and their connections, 1 set of rack, 1 set of overpressure control system, 1 set of overheating automatic protection system, 1 set of variable frequency digital display control system, and 1 set of data transmission system.